Wika Mensor CPG2400 Digital Benchtop Barometer

$ 771.99

By A Mystery Man Writer
Sept 19, 2024
4.6(440)

Wika Mensor CPG2400 Digital Benchtop Barometer

Product Description

#x0D; Accuracy (1)   0.03% R Pressure range psia 8 to 17 psia (other unit ranges are available within the equivalent psi range) Resolution Digits 5 Overpressure limits % FS 150 Compensated temperature °C 15 to 45 Storage temperature °C -20 to 70 Warm-up time Min. <1 Reading rate /sec ~4.6 sensor readings Response time mS <252 Case size in. 2.6 high x 4.2 wide x 4.9 deep Weight lbs. <2 Orientation   Negligible, can be removed with re-zeroing Communications   RS-232 or RS-485 (100 ft cable length recommended) Media compatibility   Pressure port: Clean, dry, non-corrosive, non-combustible, non-oxidizing gases for all rated ranges.Ranges ≥ 7.5 psi: All other media compatible with aluminum, 316 stainless steel, brass, Buna N, Viton, sealant, silicone grease and RTV. Not designed for oxygen service. Cannot guarantee accuracy on media other than gases.Reference port: Clean, dry, non-corrosive gases. Power input   12 VDC, .125 A Pressure interfaces   7/16 - 20 female SAE/MS. 1/8” FNPT adapters provided Pressure units   psi, inHg @0°C, inHg @60°F, inH2O @4°C, inH2O @20°C, bar, mbar, mmHg @0°C, cmHg @0°C, Pa, hPa, kPa, MPa, kg/cm2, cmH2O @4°C, cmH2O @20°C, MSW @0°C Display   Monochrome 128 x 64 LCD with white LED backlight (1) Accuracy is defined as the total measurement uncertainty, which is expressed with the coverage factor (k=2) and includes the following factors: the intrinsic performance of the instrument, the measurement uncertainty of the reference instrument, long-term stability, influence of ambient conditions, drift and temperature effects over the compensated range during a periodic zero point adjustment.