ORION 26-520 GALAXY PREMIUM BODY FILLER – 3 LITER – Custom Fineline Tape & Art Supplies
-
By A Mystery Man Writer
-
-
4.9(329)
Product Description
26-520 PREMIUM BODY FILLER has excellent adhesion to galvanized steel and aluminum. Can be used for cosmetic fiberglass and composite repairs. Stain resistant for use with basecoat/clearcoat paints. Blue cream hardener included. The Substrates: Galaxy 26-520 Premium Body Filler can be applied to: Steel Galvanized Stee.
26-520 PREMIUM BODY FILLER has excellent adhesion to galvanized steel and aluminum. Can be used for cosmetic fiberglass and composite repairs. Stain resistant for use with basecoat/clearcoat paints.
Blue cream hardener included.
The Substrates: Galaxy 26-520 Premium Body Filler can be applied to:
Steel
Galvanized Steel
Aluminum
Fiberglass
SMC
The Prep:
Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry the surface before repairing.
Keep the repair area small. Use 80 grit to remove the paint and featheredge.
The Mixing:
Stir the filler before using. Knead the cream hardener.
Measure hardener 2% by weight (add a ribbon of cream hardener from edge
to edge across the center of a 4” diameter puddle).
Puddles larger than 4” (10 cm) in diameter will require additional hardener. Mix thoroughly until uniform color is achieved.
Approximate setting time is 3-5 minutes @ 72°F
The Application:
Apply in layers with even firm pressure.
Do not apply all at once.
The Finish:
Sand body filler with 80 grit sandpaper.
Finish sand body filler with 180 grit. Sand bare metal and featheredge with 180 grit to remove 80 grit scratches.
The Fine Print:
Never return mixed filler to can
Keep can closed and store in a cool dry place, Use with cream hardener only.
.26-520 PREMIUM BODY FILLER has excellent adhesion to galvanized steel and aluminum. Can be used for cosmetic fiberglass and composite repairs. Stain resistant for use with basecoat/clearcoat paints. Blue cream hardener included. The Substrates: Galaxy 26-520 Premium Body Filler can be applied to: Steel Galvanized Steel Aluminum Fiberglass SMC The Prep: Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry the surface before repairing. Keep the repair area small. Use 80 grit to remove the paint and featheredge. The Mixing: Stir the filler before using. Knead the cream hardener. Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle). Puddles larger than 4” (10 cm) in diameter will require additional hardener. Mix thoroughly until uniform color is achieved. Approximate setting time is 3-5 minutes @ 72°F The Application: Apply in layers with even firm pressure. Do not apply all at once. The Finish: Sand body filler with 80 grit sandpaper. Finish sand body filler with 180 grit. Sand bare metal and featheredge with 180 grit to remove 80 grit scratches. The Fine Print: Never return mixed filler to can Keep can closed and store in a cool dry place, Use with cream hardener only.
This mask comes with 2 P100 dust filters., Respirator Details * This series respirator combines comfort and convenience * Comfortable soft,
3M Half Facepiece Respirator with Organic Cartridges, N95 Pre-Filters, and Retainers for Paint Fumes
Swimline pool liners have the best cold crack resistance in the industry. This means that your pool liner is harder to break or crack in the cold harmful weather.Features. Rugged lap-style seams will withstand even the harshest winter's. These premium liners are manufactured to provide maximum protection from the sun's damaging rays. Protected against chemicals and UV fading. Overlap liners basically hang over the side of your above ground pool wall.
Swimline LI2452ASU Swirl 24' x 52 Pool Uni-Bead Liner Round
ETHA 3 M and ETHA 3 FLE 3 Body Kits FLE3 ETHA3 ETHA3M
【A NEW Round 270mm Print Bed Surface Replacement】Only 1PC 270mm/10.6inch Smooth PET+Textured PEI Flexible Removable Hot Bed Replacement Accessory in